|
|
|
GP 100
The Sykes AmeriPumps GP100 automatic priming centrifugal pump is the world standard for temporary
low volume pumping.
Excelling in sewer by-pass, well-point dewatering, and straight dewatering, the GP100 performs the
work of all three. The Sykes Univac vacuum system allows the GP100 to prime and re-prime automatically;
to operate with the suction intake intermittently exposed to atmosphere; and to run dry for indefinite
periods of time without harm to the pump. The capacities to handle solids up to 2”, maximum flows
of 745 gpm, and up to 110 ft of dynamic head, makes the GP100 the most versatile low volume pump
available. Sound attenuation is standard with the GP100.
|
|
FEATURES
· Compact sound attenuated unit, meets
OSHA noise workplace requirements.
· Mounted on a two-wheel highway trailer
system, pumpset can be converted to a
skid in minutes.
· Self-contained fuel tank, allows more
than 30 hours of operation between
refueling.
· Close coupled centrifugal pump with
vacuum priming system mounted to a
diesel engine. Also available in electric
drive or as a bare shaft pump end.
· Engine containment to prevent
environmental spills.
· Most flexible pumpset in the industry –
handles raw sewage, slurries, well-point
dewatering and liquids with solids up
to 2” diameter.
· Sykes Univac patented vacuum priming
system, with back flush system to allow
clearing of suction pipe with the push
of a lever.
· Patented, dry running vacuum pressure
seal allows for continuous dry running
periods and easy, inexpensive field
replacement.
· Standard engine – Caterpillar 3011.
Available with a variety of engines
including a Cummins, John Deere, and
Isuzu.
|
PUMP SPECS
Performance
• Maximum Flow 745 GPM
(gallons per minute)
• Maximum Discharge Head 110 Ft
• Maximum Particle Size 2 inches
Pipe Connections
• 4” Table D Suction
• 4” Table D Discharge
• Bauer Type couplings optional
Weight (Typical)
• 1200 lbs (full of fuel)
Fuel Tank
• 30 Gallons Capacity
• 30 hour + runtime
• Cleaning and flushing facilities
Engine
• Caterpillar 3011NA
• 20 HP @ 2000 RPM
Priming System
Flood lubricated rotary vacuum pump of
minimal displacement 25 CFM
incorporating non-return valve
Shaft Seal
· Sykes patented vacuum/pressure seal
· Single ring of packing
· Spring loaded
· No adjustment necessary
· Easy repacking
· Chrome oxide coating on wear ring
The Sykes Univac pump has evolved from
over 140 years of heavy duty pump
manufacturing to be the industry standard
for general purpose dewatering, sewer bypass,
and well-point dewatering.
|
|
|
|
|
